| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.095 INCHES NOMINAL |
| FIRST END LOCATION | BOTH ENDS |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| OVERALL LENGTH | 2.275 INCHES MINIMUM AND 2.285 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 410 OVERALL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| SECOND END TAPER LENGTH | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SHANK DIAMETER | 0.115 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| SHANK LENGTH | 0.870 INCHES MINIMUM AND 0.890 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.220 INCHES MINIMUM AND 0.221 INCHES MAXIMUM |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE FINISH | 32.0 MICROINCHES SHOULDER END |