|
|
|
National Stock Number:
5315-00-377-6488
Federal Supply Class:
5315
National Item Identification Number:
003776488
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 3137370PC25 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 3174854PC2 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 496H102PC25 | 03966 | ZURN INDUSTRIES INC | | 496H102PC25 | 70487 | AMERIDRIVES INTERNATIONAL LLC | | 496H108PC2 | 70487 | AMERIDRIVES INTERNATIONAL LLC | | 600001PC25 | 70487 | AMERIDRIVES INTERNATIONAL LLC | | 600052PC26 | 03966 | ZURN INDUSTRIES INC | | 600091-5 | 03966 | ZURN INDUSTRIES INC | | 600091-5 | 70487 | AMERIDRIVES INTERNATIONAL LLC | | 600052PC26 | 70487 | AMERIDRIVES INTERNATIONAL LLC | | 600010PC2 | 70487 | AMERIDRIVES INTERNATIONAL LLC |
|
Techincal Specification:
| FIRST END LOCATION | SHOULDER END | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL | | OVERALL LENGTH | 1.536 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | SECOND END STYLE | SQUARE | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SHANK DIAMETER | 0.7112 INCHES MINIMUM AND 0.7115 INCHES MAXIMUM | | SHANK LENGTH | 0.406 INCHES NOMINAL | | SHOULDER DIAMETER | 0.7652 INCHES MINIMUM AND 0.7656 INCHES MAXIMUM | | SPECIAL FEATURES | TAPPED HOLE FROM SHOULDER END 5/16-18 UNC 2B RH THD 0.625 IN. DEEP | | STYLE DESIGNATOR | SHOULDER | | SURFACE FINISH | 16.000 MICROINCHES OUTSIDE DIAMETER |
|