| CRITICALITY CODE JUSTIFICATION | ABMZ |
| DIAMETER | 0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.126 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE TO FLAT | 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.052 INCHES MINIMUM AND 0.056 INCHES MAXIMUM |
| HEAD STYLE | DEE |
| HEIGHT | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633,FS1015 THRU FS1045 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| PIN HEAD DIAMETER | 0.375 INCHES NOMINAL |
| STYLE DESIGNATOR | GROOVE |
| SURFACE FINISH | 125.0 MICROINCHES CHAMFERED END |
| SURFACE FINISH | 125.0 MICROINCHES HEAD BEARING SURFACE |
| SURFACE FINISH | 125.0 MICROINCHES HEAD OUTSIDE DIAMETER |
| SURFACE FINISH | 125.0 MICROINCHES HEAD TOP |
| SURFACE FINISH | 32.0 MICROINCHES LONG SHANK |
| SURFACE TREATMENT | OXIDE OVERALL |
| UNDERCUT DIAMETER | 0.143 INCHES MINIMUM AND 0.153 INCHES MAXIMUM |
| UNDER HEAD LENGTH | 1.048 INCHES MINIMUM AND 1.078 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |