| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| FIRST STEP LENGTH | 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| FIRST STEP DIAMETER | 0.2510 INCHES MINIMUM AND 0.2515 INCHES MAXIMUM |
| HEAD STYLE | FLAT |
| HEIGHT | 0.025 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 TYPE 303 FED SPEC 1ST MATERIAL RESPONSE OR MIL-S-7720 COMP 316 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OR STEEL COMP 316 OVERALL |
| PIN HEAD DIAMETER | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| SECOND STEP DIAMETER | 0.2494 INCHES MINIMUM AND 0.2499 INCHES MAXIMUM |
| SECOND STEP LENGTH | 0.220 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE FINISH | 250.0 MICROINCHES BOTH ENDS |
| SURFACE FINISH | 250.0 MICROINCHES HEAD TOP |
| SURFACE FINISH | 63.0 MICROINCHES LARGE SHANK |
| SURFACE FINISH | 63.0 MICROINCHES SHOULDER END |
| UNDER HEAD LENGTH | 0.340 INCHES MINIMUM AND 0.365 INCHES MAXIMUM |