|
|
|
National Stock Number:
5315-00-390-5651
Federal Supply Class:
5315
National Item Identification Number:
003905651
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 48A20011 | 80049 | DEPARTMENT OF THE AIR FORCE | | 48A20011 | 88049 | SAFETY FOR VISUAL EDUCATION |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.719 INCHES MINIMUM AND 3.781 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.281 INCHES MINIMUM AND 0.344 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 29.5 DEGREES MINIMUM AND 30.5 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.172 INCHES MINIMUM AND 0.234 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL COMP 1020 OR STEEL COMP 1018 OR STEEL COMP 1025 OVERALL | | PIN OVERALL DIAMETER | 1.0000 INCHES NOMINAL | | PIN OVERALL LENGTH | 4.344 INCHES MINIMUM AND 4.406 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.172 INCHES MINIMUM AND 0.234 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR MIL-A-8625,TY 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OR ANODIZE OVERALL |
|
|