| FIRST STEP LENGTH | 1.000 INCHES NOMINAL |
| FIRST STEP DIAMETER | 0.165 INCHES MINIMUM AND 0.175 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| HEIGHT | 0.657 INCHES NOMINAL |
| OVERALL LENGTH | 1.125 INCHES NOMINAL |
| MATERIAL | STEEL COMP 303 OVERALL |
| NUMERIC DESIGNATION OF STEP ECCENTRIC TO HEAD | 3 |
| OFFSET DISTANCE BETWEEN GEOMETRIC CENTER OF HEAD AND CENTERLINE OF SHANK/SHOULDER | 0.031 INCHES NOMINAL |
| PIN HEAD DIAMETER | 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| SECOND STEP DIAMETER | 0.375 INCHES NOMINAL |
| SECOND STEP LENGTH | 0.060 INCHES MINIMUM AND 0.064 INCHES MAXIMUM |
| SPECIAL FEATURES | THREE UNDERCUTS |
| STYLE DESIGNATOR | ECCENTRIC |
| SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THIRD STEP DIAMETER | 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| THIRD STEP LENGTH | 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |