|
|
|
National Stock Number:
5315-00-395-2938
Federal Supply Class:
5315
National Item Identification Number:
003952938
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 11727419 | 19200 | US ARMY ARDEC RDECOM |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 7.875 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.938 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.062 INCHES MINIMUM AND 0.093 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.109 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-W-52263,COND A MIL SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 303 OR STEEL COMP 303SE OVERALL | | PIN OVERALL DIAMETER | 0.3090 INCHES MINIMUM AND 0.3100 INCHES MAXIMUM | | PIN OVERALL LENGTH | 11.750 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.109 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|