|
|
|
National Stock Number:
5315-00-462-5127
Federal Supply Class:
5315
National Item Identification Number:
004625127
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 716923-10 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4340 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND | | 44.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 0.320 INCHES MINIMUM AND | | 0.330 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.6377 INCHES MINIMUM AND | | 0.6379 INCHES MAXIMUM | | SHANK DIAMETER | 0.500 INCHES NOMINAL | | OVERALL LENGTH | 2.070 INCHES MINIMUM AND | | 2.090 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END LOCATION | BOTH ENDS | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.500 INCHES | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.260 INCHES MINIMUM AND | | 0.280 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | DRILLED SHANK THREADED PIN | | FIRST HOLE DIAMETER | 0.092 INCHES MINIMUM AND | | 0.097 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.949 INCHES MINIMUM AND | | 1.969 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73030 | | DESIGN CONTROL REFERENCE | 716923-10 |
|
|