| FIRST END STYLE | SQUARE |
| HEAD STYLE | FLAT |
| MATERIAL | STEEL COMP 630 OVERALL |
| STYLE DESIGNATOR | GROOVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | EMS 250,TYPE 2,CLASS B GARRETT CORP MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND |
| 47.0 ROCKWELL C MAXIMUM OVERALL |
| DIAMETER | 0.1242 INCHES MINIMUM AND |
| 0.1246 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.1042 INCHES MINIMUM AND |
| 0.1046 INCHES MAXIMUM |
| UNDER HEAD LENGTH | 0.430 INCHES MINIMUM AND |
| 0.440 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.040 INCHES MAXIMUM |
| PIN HEAD DIAMETER | 0.188 INCHES NOMINAL |
| HEIGHT | 0.020 INCHES MINIMUM AND |
| 0.040 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.041 INCHES MINIMUM AND |
| 0.046 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.045 INCHES MINIMUM AND |
| 0.065 INCHES MAXIMUM |
| SURFACE FINISH | 125.0 MICROINCHES OVERALL |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 59364 |
| DESIGN CONTROL REFERENCE | 882619-1 |