|
|
|
National Stock Number:
5315-00-492-3653
Federal Supply Class:
5315
National Item Identification Number:
004923653
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 47A16231 | 80049 | DEPARTMENT OF THE AIR FORCE |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1018 OR | | STEEL COMP 1020 OR | | STEEL COMP 1025 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7097 COND B4 MIL SPEC ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM OR | | ZINC OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 1 CL 1 FED SPEC 1ST TREATMENT RESPONSE OR | | QQ-Z-325 TY 1 CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.031 INCHES MINIMUM AND | | 0.094 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND | | 45.5 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.172 INCHES MINIMUM AND | | 0.234 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.172 INCHES MINIMUM AND | | 0.234 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.281 INCHES MINIMUM AND | | 0.344 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 4.250 INCHES MINIMUM AND | | 4.312 INCHES MAXIMUM | | PIN OVERALL LENGTH | 4.875 INCHES MINIMUM AND | | 4.938 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 1.0000 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 80049 | | DESIGN CONTROL REFERENCE | 47A16231 |
|
|