| MATERIAL | STEEL COMP 630 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND |
| 47.0 ROCKWELL C MAXIMUM OVERALL |
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.462 INCHES MINIMUM AND |
| 0.512 INCHES MAXIMUM |
| SHOULDER WIDTH ACROSS FLATS | 0.560 INCHES NOMINAL |
| SHANK DIAMETER | 0.1225 INCHES MINIMUM AND |
| 0.1230 INCHES MAXIMUM |
| OVERALL LENGTH | 1.287 INCHES MINIMUM AND |
| 1.387 INCHES MAXIMUM |
| SECOND SHANK DIAMETER | 0.2016 INCHES MINIMUM AND |
| 0.2021 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.675 INCHES MINIMUM AND |
| 0.725 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.015 INCHES MINIMUM AND |
| 0.047 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | POINTED |
| SECOND END TAPER LENGTH | 0.107 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END LOCATION | SHORT SHANK END |
| THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.313 INCHES MINIMUM AND |
| 0.368 INCHES MAXIMUM |
| SURFACE FINISH | 16.0 MICROINCHES SHORT SHANK END |
| SPECIAL FEATURES | 0.020 IN. 0.030 IN. MAX RADIUS BY 0.148 IN. MIN 0.156 IN. MAX THREAD RELIEF,BEARING SURFACE OF SHOULDER SERRATED CONCENTRICALLY 0.008 IN. MIN 0.010 IN. MAX DEEP SERRATION ANGLE 90 DEG |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 06481 |
| DESIGN CONTROL REFERENCE | 533050-35 |