|
|
|
National Stock Number:
5315-00-536-6854
Federal Supply Class:
5315
National Item Identification Number:
005366854
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 14-74270-3 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 14-74270-3 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| EFFECTIVE LENGTH | 2.415 INCHES NOMINAL | | DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM | | FIRST END COUNTERSINK ANGLE | 60.0 DEGREES NOMINAL | | FIRST END COUNTERSINK DIAMETER | 0.250 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED AND COUNTERSUNK | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | FIRST END LOCATION | BOTH ENDS | | FIRST END TAPER LENGTH | 0.125 INCHES NOMINAL | | MATERIAL | STEEL COMP XM-13 OVERALL | | OVERALL LENGTH | 3.380 INCHES NOMINAL | | SECOND END COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | SECOND END COUNTERSINK DIAMETER | 0.363 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED AND COUNTERSUNK | | SECOND END TAPER ANGLE | 7.5 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.715 INCHES NOMINAL | | SHEAR STRENGTH | 220000 SINGLE POUNDS PER SQUARE INCH | | STYLE DESIGNATOR | GROOVE | | SURFACE FINISH | 8.0 MICROINCHES OUTSIDE DIAMETER | | UNDERCUT DIAMETER | 0.400 INCHES NOMINAL | | UNDERCUT RADIUS | 0.125 INCHES NOMINAL | | UNDERCUT WIDTH | 0.125 INCHES NOMINAL |
|
|