|
|
|
National Stock Number:
5315-00-538-0874
Federal Supply Class:
5315
National Item Identification Number:
005380874
Description:
PIN,SHOULDER,HEADED
Detail:
A CYLINDRICALLY-SHAPED HEADED ITEM, HAVING A SOLID SHANK IN STEPS OF TWO OR MORE DIFFERENT DIAMETERS UNDER AND IN ADDITION TO THE HEAD. EXCLUDES PIN, ECCENTRIC.
|
Manufacturer Information:
| 5380874 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| FEATURES PROVIDED | CASEHARDENED | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | FIRST STEP DIAMETER | 1.433 INCHES MINIMUM AND 1.435 INCHES MAXIMUM | | FIRST STEP LENGTH | 0.562 INCHES NOMINAL | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL | | HEAD STYLE | ROUND W/WRENCH FLATS | | HEAD WIDTH | 1.612 INCHES MINIMUM AND 1.620 INCHES MAXIMUM | | HEIGHT | 0.312 INCHES NOMINAL | | MATERIAL | STEEL COMP 4135H OR STEEL COMP 4140 OR STEEL COMP 5140 OR STEEL COMP 8640 OR STEEL COMP 8740 OVERALL | | PIN HEAD DIAMETER | 2.094 INCHES MINIMUM AND 2.125 INCHES MAXIMUM | | SECOND STEP DIAMETER | 1.369 INCHES MINIMUM AND 1.371 INCHES MAXIMUM | | SECOND STEP LENGTH | 3.125 INCHES NOMINAL | | SPECIAL FEATURES | 0.219 IN. DIA HOLE DRILLED THRU SHANK 90 DEG TO FLATS 3.438 IN. CENTER OF HOLE TO BOTTOM SURFACE OF HEAD,BOTTOM EDGE OF FLATS CHAMFERED 0.062 IN. BY 45 DEG | | STYLE DESIGNATOR | SHOULDER | | SURFACE TREATMENT | CHROMIUM OVERALL | | UNDER HEAD LENGTH | 3.688 INCHES NOMINAL | | WIDTH ACROSS FLATS | 1.612 INCHES MINIMUM AND 1.620 INCHES MAXIMUM |
|
|