|
|
|
National Stock Number:
5315-00-575-8668
Federal Supply Class:
5315
National Item Identification Number:
005758668
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 6863897 | 73342 | ALLISON TRANSMISSION INC |
|
Techincal Specification:
| 0.025 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND | | 47.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | FIRST END LOCATION | BOTH ENDS | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73342 | | DESIGN CONTROL REFERENCE | 6863897 | | MATERIAL | STEEL COMP 420 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 420 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND | | 34.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | UNDERCUT | | SHANK LENGTH | 0.270 INCHES MINIMUM AND | | 0.310 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.370 INCHES MINIMUM AND | | 0.395 INCHES MAXIMUM | | SHANK DIAMETER | 0.3418 INCHES MINIMUM AND | | 0.3423 INCHES MAXIMUM | | OVERALL LENGTH | 0.680 INCHES MINIMUM AND | | 0.735 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.326 INCHES MINIMUM AND | | 0.336 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.035 INCHES MINIMUM AND | | 0.055 INCHES MAXIMUM | | SECOND SHANK DIAMETER | 0.3418 INCHES MINIMUM AND | | 0.3423 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.270 INCHES MINIMUM AND | | 0.310 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND |
|
|