|
|
|
National Stock Number:
5315-00-576-3671
Federal Supply Class:
5315
National Item Identification Number:
005763671
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| SMA120132-2 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | SMA120132-2 | 95036 | APPLIED DEVICES CORP |
|
Techincal Specification:
| MATERIAL | STEEL COMP 416 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SHANK LENGTH | 1.205 INCHES NOMINAL | | SHOULDER DIAMETER | 1.359 INCHES MINIMUM AND | | 1.391 INCHES MAXIMUM | | SHANK DIAMETER | 0.3735 INCHES MINIMUM AND | | 0.3740 INCHES MAXIMUM | | OVERALL LENGTH | 1.266 INCHES MINIMUM AND | | 1.297 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.303 INCHES MINIMUM AND | | 0.308 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.059 INCHES MINIMUM AND | | 0.060 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND | | 0.020 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND | | 45.5 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | FIRST END LOCATION | SHANK END | | SURFACE FINISH | 125.000 MICROINCHES OVERALL | | SPECIAL FEATURES | THREE 0.128 IN. DIA HOLES COUNTERSUNK 82 DEG TO A 0.225 IN. DIA UNEVENLY SPACED ON END OF SHOULDER | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 95036 | | DESIGN CONTROL REFERENCE | SMA120132-2 |
|
|