|
|
|
National Stock Number:
5315-00-576-6117
Federal Supply Class:
5315
National Item Identification Number:
005766117
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| WSP11-417A2 | 59462 | TEMPLETON KENLY AND CO INC |
|
Techincal Specification:
| 1.0000 INCHES MAXIMUM | | SPECIAL FEATURES | 0.250 IN. DEEP COUNTERDRILLED W/0.375 IN. DIA | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 59462 | | DESIGN CONTROL REFERENCE | WSP11-417A2 | | MATERIAL | STEEL COMP 4340 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CHROMIUM OVERALL | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND | | 36.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.016 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER | | FIRST HOLE DIAMETER | 0.500 INCHES NOMINAL | | PIN OVERALL LENGTH | 3.625 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.9990 INCHES MINIMUM AND |
|
|