|
|
|
National Stock Number:
5315-00-589-9130
Federal Supply Class:
5315
National Item Identification Number:
005899130
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 47-612-800-11 | 04614 | TEXTRON SYSTEMS CORPORATION | | 47-612-800-11 | 80070 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.090 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.032 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.051 INCHES MINIMUM AND 0.056 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8559 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1095 OVERALL | | PIN OVERALL LENGTH | 0.975 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 30.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.100 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
|
|