|
|
|
National Stock Number:
5315-00-591-2082
Federal Supply Class:
5315
National Item Identification Number:
005912082
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 5315-591-2082 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 7791057 | 19205 | SPRINGFIELD ARMORY |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-570 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 51.0 ROCKWELL C MINIMUM AND | | 55.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | GROOVE | | OVERALL LENGTH | 0.755 INCHES MAXIMUM | | DIAMETER | 0.309 INCHES MINIMUM AND | | 0.311 INCHES MAXIMUM | | EFFECTIVE LENGTH | 0.230 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.243 INCHES MINIMUM AND | | 0.245 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.285 INCHES MINIMUM AND | | 0.295 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND | | 0.030 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.0 DEGREES MINIMUM AND | | 46.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | FIRST END LOCATION | BOTH ENDS | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19205 | | DESIGN CONTROL REFERENCE | 7791057 |
|
|