|
|
|
National Stock Number:
5315-00-597-4280
Federal Supply Class:
5315
National Item Identification Number:
005974280
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 03040-185 | 31361 | WOODWARD, INC. | | 184114 | 31361 | WOODWARD, INC. | | 2F6763 | 11083 | CATERPILLAR INC | | 184114 | 66503 | WOODWARD, INC. |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.062 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.438 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.016 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.040 INCHES NOMINAL | | HARDNESS RATING | 55.0 ROCKWELL C MINIMUM OVERALL AND 60.0 ROCKWELL C MAXIMUM OVERALL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.1235 INCHES MINIMUM AND 0.1240 INCHES MAXIMUM | | PIN OVERALL LENGTH | 0.562 INCHES NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND HOLE DIAMETER | 0.040 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
|
|