|
|
|
National Stock Number:
5315-00-607-7565
Federal Supply Class:
5315
National Item Identification Number:
006077565
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 9032232 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | PAINT OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.031 INCHES MINIMUM AND | | 0.094 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.094 INCHES MINIMUM AND | | 0.156 INCHES MAXIMUM | | SECOND END TAPER ANGLE | 46.0 DEGREES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.154 INCHES MINIMUM AND | | 0.162 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.125 INCHES MINIMUM AND | | 0.129 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.219 INCHES MINIMUM AND | | 0.281 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.750 INCHES MINIMUM AND | | 2.781 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | PIN OVERALL LENGTH | 6.219 INCHES MINIMUM AND | | 6.281 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.4930 INCHES MINIMUM AND | | 0.5070 INCHES MAXIMUM |
|
|