|
|
|
National Stock Number:
5315-00-612-8997
Federal Supply Class:
5315
National Item Identification Number:
006128997
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 196B7095 | 05606 | GENERAL DYNAMICS-OTS, INC. | | 196B7095 | 28210 | UNITED STANDARD INDUSTRIES INC |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.110 INCHES MINIMUM AND 1.113 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 3.390 INCHES MINIMUM AND 3.410 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.117 INCHES MINIMUM AND 0.137 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 14.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.130 INCHES MINIMUM AND 0.170 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | PIN OVERALL DIAMETER | 0.2490 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM | | PIN OVERALL LENGTH | 7.900 INCHES MINIMUM AND 7.940 INCHES MAXIMUM | | MATERIAL | STEEL COMP 4140 OVERALL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.117 INCHES MINIMUM AND 0.137 INCHES MAXIMUM |
|
|