|
|
|
National Stock Number:
5315-00-613-2036
Federal Supply Class:
5315
National Item Identification Number:
006132036
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 6132036 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1045 AND | | STEEL COMP 1137 OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE AND | | LUBRICANT OVERALL | | HARDNESS RATING | 16.0 ROCKWELL C MINIMUM AND | | 27.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | SHOULDER | | OVERALL LENGTH | 12.656 INCHES MINIMUM AND | | 12.688 INCHES MAXIMUM | | FIRST STEP DIAMETER | 4.750 INCHES NOMINAL | | FIRST STEP LENGTH | 1.500 INCHES NOMINAL | | SECOND STEP DIAMETER | 4.240 INCHES MINIMUM AND | | 4.250 INCHES MAXIMUM | | SECOND STEP LENGTH | 1.4935 INCHES MINIMUM AND | | 1.5255 INCHES MAXIMUM | | THIRD STEP DIAMETER | 1.093 INCHES NOMINAL | | THIRD STEP LENGTH | 2.563 INCHES NOMINAL | | SECOND SHANK DIAMETER | 1.999 INCHES MINIMUM AND | | 2.000 INCHES MAXIMUM | | SECOND SHANK LENGTH | 7.100 INCHES MINIMUM AND | | 7.120 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.125 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | FIRST END LOCATION | UNTHREADED END | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 1.500 INCHES | | THREAD QUANTITY PER INCH | 12 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.206 INCHES NOMINAL | | SURFACE FINISH | 16.0 MICROINCHES LARGE SHANK | | SPECIAL FEATURES | 4.750-12UN-3A X 1.500 LARGEST SHOULDER DIA WITH 0.172 DEEP X 0.406 W SLOT IN THREAD AND 0.125 DEEP X 0.250 W KEYSLOT FIRST END | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19204 | | DESIGN CONTROL REFERENCE | 6132036 |
|
|