|
|
|
National Stock Number:
5315-00-616-5206
Federal Supply Class:
5315
National Item Identification Number:
006165206
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 699B224P1 | 24446 | GENERAL ELECTRIC COMPANY | | 699B224P1 | 97993 | GENERAL DYNAMICS DEFENSE SYSTEMS INC. DBA GENERAL DYNAMICS ADVANCED INFORMATION SYSTEMS | | SMB285267 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| MATERIAL | STEEL COMP 416 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 23.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.030 INCHES MINIMUM AND | | 0.040 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.0 DEGREES MINIMUM AND | | 46.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.060 INCHES MINIMUM AND | | 0.066 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.060 INCHES MINIMUM AND | | 0.066 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.430 INCHES MINIMUM AND | | 0.450 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.940 INCHES MINIMUM AND | | 1.010 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES BOTH ENDS | | 63.0 MICROINCHES SHANK END | | PIN OVERALL LENGTH | 1.840 INCHES MINIMUM AND | | 1.870 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.7495 INCHES MINIMUM AND | | 0.7500 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 97993 | | DESIGN CONTROL REFERENCE | 699B224P1 |
|
|