|
|
|
National Stock Number:
5315-00-621-5354
Federal Supply Class:
5315
National Item Identification Number:
006215354
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 8011913 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL COMP 303 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 FINISH NO. 5.4.1. MIL STD SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.016 INCHES MINIMUM AND | | 0.047 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.0 DEGREES MINIMUM AND | | 45.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.123 INCHES MINIMUM AND | | 0.133 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.123 INCHES MINIMUM AND | | 0.133 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.172 INCHES MINIMUM AND | | 0.203 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 6.499 INCHES NOMINAL | | PIN OVERALL LENGTH | 6.859 INCHES MINIMUM AND | | 6.891 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.9840 INCHES MINIMUM AND | | 1.0160 INCHES MAXIMUM |
|
|