|
|
|
National Stock Number:
5315-00-625-5773
Federal Supply Class:
5315
National Item Identification Number:
006255773
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 9004471 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL COMP 416 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | STYLE DESIGNATOR | UNDERCUT | | SHANK LENGTH | 0.547 INCHES MINIMUM AND | | 0.578 INCHES MAXIMUM | | SHOULDER WIDTH ACROSS FLATS | 0.484 INCHES MINIMUM AND | | 0.516 INCHES MAXIMUM | | SHANK DIAMETER | 0.248 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM | | OVERALL LENGTH | 1.359 INCHES MINIMUM AND | | 1.391 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.036 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.047 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM | | SECOND UNDERCUT WIDTH | 0.047 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM | | SECOND UNDERCUT DIAMETER | 0.036 INCHES MAXIMUM | | SECOND SHANK DIAMETER | 0.297 INCHES MINIMUM AND | | 0.328 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.672 INCHES MINIMUM AND | | 0.703 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.047 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.0 DEGREES MINIMUM AND | | 46.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | POINTED | | SECOND END TAPER LENGTH | 0.047 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM | | SECOND END TAPER ANGLE | 44.0 DEGREES MINIMUM AND | | 46.0 DEGREES MAXIMUM | | FIRST END LOCATION | LARGE END | | THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD SIZE | 0.312 INCHES | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.484 INCHES MINIMUM AND | | 0.516 INCHES MAXIMUM |
|
|