|
|
|
National Stock Number:
5315-00-682-1460
Federal Supply Class:
5315
National Item Identification Number:
006821460
Description:
PIN,COTTER
Detail:
A half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. Its ends are separable or one end is bent to hold it in place.
|
Manufacturer Information:
| 10122691 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 122-2420529 PIECE 127 | 53711 | NAVAL SEA SYSTEMS COMMAND | | FFP386 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | AN380-2C-5 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | AN381-2-20 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | 5315PL0646060 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | GH76-182-21A | 04845 | AUTOMATIC SWITCH COMPANY | | MS24665-157 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NASM24665 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS24665-157 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS24665-157 | A0126 | LEONARDO SPA HELICOPTERS DIVISION -PRODUCTION SITE | | MS24665-233 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| MATERIAL | STEEL COMP 302 OR | | STEEL COMP 304 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A493 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 65.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND | | 78.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL | | STYLE DESIGNATOR | STANDARD | | DIAMETER | 0.056 INCHES MINIMUM AND | | 0.060 INCHES MAXIMUM | | UNDERLOOP LENGTH | 1.125 INCHES MINIMUM AND | | 1.375 INCHES MAXIMUM | | POINT TYPE | EXTENDED PRONG SQUARE CUT |
|
|