|
|
|
National Stock Number:
5315-00-684-9981
Federal Supply Class:
5315
National Item Identification Number:
006849981
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 2300094-180300.05.0 | C2311 | BUNDESAMT FUER AUSRUESTUNG, INFORMATIONSTECHNIK UND NUTZUNG DER BUNDESWEHR (BAAINBW) - BENUTZUNGSRECHTE AN TECHNISCHEN U | | 5315006849981 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 7970271 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OR | | ZINC AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 CL 2 FED SPEC 1ST TREATMENT RESPONSE OR | | QQ-Z-325,TY 2 CL 2 FED SPEC 2ND TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.047 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND | | 47.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER | | FIRST HOLE DIAMETER | 0.141 INCHES MINIMUM AND | | 0.156 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 2.000 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.6140 INCHES MINIMUM AND | | 0.6190 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19207 | | DESIGN CONTROL REFERENCE | 7970271 |
|
|