|
|
|
National Stock Number:
5315-00-699-9804
Federal Supply Class:
5315
National Item Identification Number:
006999804
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 8525321 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A400-69 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.063 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.125 INCHES MINIMUM AND | | 0.129 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.125 INCHES MINIMUM AND | | 0.129 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 2.188 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.563 INCHES NOMINAL | | PIN OVERALL LENGTH | 4.490 INCHES MINIMUM AND | | 4.510 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.3650 INCHES MINIMUM AND | | 0.3850 INCHES MAXIMUM | | SPECIAL FEATURES | 0.185 TO 0.193 IN.DIA.THRU 0.250 DIA.X 90 DEG.COUNTERSUNK BOTH SIDES 0.250 FROM END | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 18876 | | DESIGN CONTROL REFERENCE | 8525321 |
|
|