|
|
|
National Stock Number:
5315-00-705-0660
Federal Supply Class:
5315
National Item Identification Number:
007050660
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 7050660 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| UNDER HEAD LENGTH | 3.344 INCHES NOMINAL | | DIAMETER | 0.4945 INCHES MINIMUM AND | | 0.4950 INCHES MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 1340 OR | | STEEL COMP 8640 OR | | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC 1ST MATERIAL RESPONSE OR | | QQ-S-624 FED SPEC 2ND MATERIAL RESPONSE OR | | QQ-S-624,FS 9440 FED SPEC 3RD MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL | | CHAMFER LENGTH | 0.094 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 13.0 DEGREES MINIMUM AND | | 17.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.609 INCHES MINIMUM AND | | 0.641 INCHES MAXIMUM | | HEIGHT | 0.141 INCHES MINIMUM AND | | 0.172 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.1406 INCHES MINIMUM AND | | 0.1506 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.063 INCHES NOMINAL |
|
|