|
|
|
National Stock Number:
5315-00-706-9195
Federal Supply Class:
5315
National Item Identification Number:
007069195
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 0729902 | S3002 | GENERAL DYNAMICS EUROPEAN LAND SYSTEMS - MOWAG GMBH | | 5315007069195 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 7069195 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 5315PL2170203 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | ZINC AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-Z-325,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 230.0 BRINELL HULTGREN MINIMUM AND | | 283.0 BRINELL HULTGREN MAXIMUM OVERALL | | STYLE DESIGNATOR | GROOVE | | OVERALL LENGTH | 4.609 INCHES MINIMUM AND | | 4.641 INCHES MAXIMUM | | DIAMETER | 1.458 INCHES MINIMUM AND | | 1.478 INCHES MAXIMUM | | EFFECTIVE LENGTH | 3.744 INCHES NOMINAL | | UNDERCUT DIAMETER | 1.245 INCHES MINIMUM AND | | 1.255 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.256 INCHES NOMINAL | | SECOND UNDERCUT WIDTH | 0.256 INCHES NOMINAL | | UNDERCUT RADIUS | 0.128 INCHES MINIMUM AND | | 0.133 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.109 INCHES MINIMUM AND | | 0.141 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | FIRST END LOCATION | BOTH ENDS | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.281 INCHES MINIMUM AND | | 0.291 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.281 INCHES MINIMUM AND | | 0.291 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.297 INCHES MINIMUM AND | | 0.328 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.984 INCHES MINIMUM AND | | 4.016 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES SHANK END |
|
|