| CHAMFER LENGTH | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| DIAMETER | 0.1244 INCHES MINIMUM AND 0.1249 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.125 INCHES NOMINAL |
| FIRST HOLE DIAMETER | 0.066 INCHES MINIMUM AND 0.071 INCHES MAXIMUM |
| HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | FLAT |
| HEIGHT | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6304 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| PIN HEAD DIAMETER | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| PIN CHAMFER ANGLE | 14.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE FINISH | 63.0 MICROINCHES OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2404 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | NICKEL OVERALL |
| UNDER HEAD LENGTH | 0.815 INCHES MINIMUM AND 0.835 INCHES MAXIMUM |