|
|
|
National Stock Number:
5315-00-725-4259
Federal Supply Class:
5315
National Item Identification Number:
007254259
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 1561620 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| MATERIAL | STEEL COMP 416 OR | | STEEL COMP 416SE OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5610 ASSN STD 1ST MATERIAL RESPONSE AND | | ASTMA582 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND | | 46.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.0302 INCHES MINIMUM AND | | 0.0322 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND | | 45.5 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.115 INCHES MINIMUM AND | | 0.135 INCHES MAXIMUM | | SECOND END TAPER ANGLE | 29.5 DEGREES MINIMUM AND | | 30.5 DEGREES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES OVERALL | | PIN OVERALL LENGTH | 1.740 INCHES MINIMUM AND | | 1.760 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.3115 INCHES MINIMUM AND | | 0.3135 INCHES MAXIMUM |
|
|