|
|
|
National Stock Number:
5315-00-726-4267
Federal Supply Class:
5315
National Item Identification Number:
007264267
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 00064-6 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | | 327B636P8 | 24446 | GENERAL ELECTRIC COMPANY | | 327B636P8 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| UNDER HEAD LENGTH | 0.620 INCHES MINIMUM AND | | 0.630 INCHES MAXIMUM | | DIAMETER | 0.1250 INCHES MINIMUM AND | | 0.1255 INCHES MAXIMUM | | HEAD STYLE | FLAT | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 601 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6304 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | NICKEL OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-26074 CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND | | 36.0 ROCKWELL C MAXIMUM OVERALL | | CHAMFER LENGTH | 0.020 INCHES MINIMUM AND | | 0.040 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 14.0 DEGREES MINIMUM AND | | 16.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.250 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | HEIGHT | 0.020 INCHES MINIMUM AND | | 0.040 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.040 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.090 INCHES NOMINAL | | SURFACE FINISH | 32.0 MICROINCHES LARGE SHANK | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 99207 | | DESIGN CONTROL REFERENCE | 327B636P8 |
|
|