|
|
|
National Stock Number:
5315-00-736-4920
Federal Supply Class:
5315
National Item Identification Number:
007364920
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 2300094-143010.02.0 | C2311 | BUNDESAMT FUER AUSRUESTUNG, INFORMATIONSTECHNIK UND NUTZUNG DER BUNDESWEHR (BAAINBW) - BENUTZUNGSRECHTE AN TECHNISCHEN U | | 7364920 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 42.0 DEGREES MINIMUM AND 48.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.031 INCHES MINIMUM AND 0.094 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.4980 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM | | PIN OVERALL LENGTH | 5.500 INCHES MINIMUM AND 5.562 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SPECIAL FEATURES | 0.0928 IN. MIN 0.0943 IN. MAX W BY 0.150 IN. MIN 0.154 IN. MAX DEPTH OF SLOT CENTER OF WHICH IS LOCATED 0.344 IN. FROM END AND 0.50 IN. MIN 0.061 IN. MAX DEPTH OF GROOVE CENTER OF WHICH IS LOCATED 0.344 IN. FROM A END 180 DEG FROM SLOT | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-16232,TYM,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL |
|
|