| CHAMFER LENGTH | 0.031 INCHES MINIMUM AND 0.094 INCHES MAXIMUM |
| DIAMETER | 0.368 INCHES MINIMUM AND 0.373 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.1406 INCHES NOMINAL |
| HEAD STYLE | FLAT CHAMFER |
| HEIGHT | 0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL | STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1024 OR STEEL COMP 1025 OVERALL |
| PIN HEAD DIAMETER | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OR CADMIUM AND CHROMATE OR CADMIUM AND PHOSPHATE OVERALL |
| UNDER HEAD LENGTH | 1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM |