|
|
|
National Stock Number:
5315-00-737-4491
Federal Supply Class:
5315
National Item Identification Number:
007374491
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 6702379 | 24617 | GENERAL MOTORS CORP | | 7374491 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| FEATURES PROVIDED | CASEHARDENED | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 24.0 DEGREES MINIMUM AND 26.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.006 INCHES MINIMUM AND 0.026 INCHES MAXIMUM | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE AND SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 3140 OVERALL | | PIN OVERALL LENGTH | 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.1842 INCHES MINIMUM AND 0.1847 INCHES MAXIMUM | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 14.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM | | SECOND END TAPER LENGTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SPECIAL FEATURES | PIN SLOTTED ON FACE OF A END 0.062 IN. BY 0.062 IN. DEEP,PIN SLOTTED PARALLEL TO AXIS 0.125 IN. W BY 0.059 IN. DEEP 0.188 IN. CENTER OF SLOT TO B END |
|
|