|
|
|
National Stock Number:
5315-00-738-0550
Federal Supply Class:
5315
National Item Identification Number:
007380550
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 37B201567P101 | 02723 | ABBOTT PRODUCTS INC | | 37B201567P101 | 03350 | GENERAL ELECTRIC COMPANY DBA GE STRUCTURED SERVICES DIV GENERAL ELECTRIC STRUCTURED SERVICES LP | | 37B201567P101 | 24446 | GENERAL ELECTRIC COMPANY | | 37B201567P101 | 96972 | GENERAL ELECTRIC CO FLIGHT PROPULSION DIVISION OF ELECTRONIC ATOMIC AND DEFENSE SYSTEMS GROUP | | 37B201567P101 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| CHAMFER LENGTH | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM | | DIAMETER | 0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.140 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | HEIGHT | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 440C OVERALL | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM | | STYLE DESIGNATOR | STRAIGHT | | SURFACE FINISH | 63.0 MICROINCHES GRIP | | UNDER HEAD LENGTH | 0.640 INCHES NOMINAL |
|