| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| FIRST STEP LENGTH | 0.062 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| FIRST STEP DIAMETER | 0.179 INCHES MINIMUM AND 0.181 INCHES MAXIMUM |
| HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | FLAT |
| HEIGHT | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 615 OVERALL |
| PIN HEAD DIAMETER | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| SECOND STEP DIAMETER | 0.1395 INCHES MINIMUM AND 0.1400 INCHES MAXIMUM |
| SECOND STEP LENGTH | 0.166 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| SPECIAL FEATURES | 0.015 IN.MIN 0.025 IN. MAX WIDE,0.044 IN.MIN 0.056 IN. MAX DEEP GRINDING RELIEF UNDER HEAD ON FIRST SHOULDER AND 0.033 IN.MIN 0.037 IN. MAX HOLE THRU SHOULDER 0.082 IN. MIN 0.102 IN. MAX FROM CENTERLINE OF HOLE TO END |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE FINISH | 10.0 MICROINCHES LARGE SHANK |
| THIRD STEP DIAMETER | 0.0835 INCHES MINIMUM AND 0.0840 INCHES MAXIMUM |
| THIRD STEP LENGTH | 0.218 INCHES MINIMUM AND 0.242 INCHES MAXIMUM |
| UNDER HEAD LENGTH | 0.460 INCHES MINIMUM AND 0.480 INCHES MAXIMUM |