| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.102 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.033 INCHES MINIMUM AND 0.037 INCHES MAXIMUM |
| FIRST STEP LENGTH | 0.078 INCHES MINIMUM AND 0.0821 INCHES MAXIMUM |
| FIRST STEP DIAMETER | 0.175 INCHES MINIMUM AND 0.181 INCHES MAXIMUM |
| HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | FLAT |
| HEIGHT | 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 615 OVERALL |
| PIN HEAD DIAMETER | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| SECOND STEP DIAMETER | 0.1235 INCHES MINIMUM AND 0.1240 INCHES MAXIMUM |
| SECOND STEP LENGTH | 0.678 INCHES NOMINAL |
| SPECIAL FEATURES | FIRST STEP FLAT 0.140 IN. ACROSS |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE FINISH | 10.0 MICROINCHES LARGE SHANK |
| UNDER HEAD LENGTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |