|
|
|
National Stock Number:
5315-00-741-1040
Federal Supply Class:
5315
National Item Identification Number:
007411040
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 299211 | 23705 | FRUEHAUF CORP | | 7411040 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.547 INCHES MINIMUM AND 0.578 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.137 INCHES MINIMUM AND 0.143 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 0.7480 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM | | PIN OVERALL LENGTH | 5.109 INCHES MINIMUM AND 5.141 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SPECIAL FEATURES | TWO FLAT SURFACES 0.500 IN. LONG BY 0.500 IN. WIDE ACROSS FLATS LOCATED PERPENDICULAR TO AXIS OF HOLE ON A END |
|
|