|
|
|
National Stock Number:
5315-00-741-4438
Federal Supply Class:
5315
National Item Identification Number:
007414438
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 21899-1002-1 | 97613 | SARGENT AEROSPACE & DEFENSE, LLC | | 405391 | 06840 | BENDIX CORP THE | | 405391 | 56705 | DONALLCO INC | | 405391 | 59364 | HONEYWELL INTERNATIONAL INC. | | 405391 | 77068 | ALLIED-SIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO ELECTRODYNAMICS DIV | | 405391 | 78062 | SARGENT AEROSPACE & DEFENSE, LLC | | 7414438 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 5315PL0700268 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 405391 | A0126 | LEONARDO SPA HELICOPTERS DIVISION -PRODUCTION SITE |
|
Techincal Specification:
| 0.036 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.006 INCHES MINIMUM AND | | 0.026 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND | | 45.5 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | FIRST END LOCATION | BOTH ENDS | | SURFACE FINISH | 12.0 MICROINCHES SHANK END | | SPECIAL FEATURES | 0.125 IN. DIA CENTER DRILLED BOTH ENDS | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 59364 | | DESIGN CONTROL REFERENCE | 405391 | | MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-689 FED SPEC SINGLE MATERIAL RESPONSE OR | | AN-QQ-S-690 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | STYLE DESIGNATOR | GROOVE | | OVERALL LENGTH | 2.428 INCHES MINIMUM AND | | 2.448 INCHES MAXIMUM | | DIAMETER | 0.3040 INCHES MINIMUM AND | | 0.3050 INCHES MAXIMUM | | EFFECTIVE LENGTH | 2.314 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.281 INCHES MINIMUM AND | | 0.285 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.028 INCHES MINIMUM AND | | 0.036 INCHES MAXIMUM | | SECOND UNDERCUT WIDTH | 0.028 INCHES MINIMUM AND |
|
|