|
|
|
National Stock Number:
5315-00-752-4316
Federal Supply Class:
5315
National Item Identification Number:
007524316
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 1274488 | 12204 | DAIMLER CHRYSLER | | 236224 | 32537 | JOY GLOBAL UNDERGROUND MINING LLC | | 7524316 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 5315007524316 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5315007524316 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 7524316 | T0720 | FNSS SAVUNMA SISTEMLERI ANONIM SIRKETI |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4140 OR | | STEEL COMP 8640 OR | | STEEL COMP 8740 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A304 ASSN STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | GROOVE | | OVERALL LENGTH | 1.547 INCHES MINIMUM AND | | 1.578 INCHES MAXIMUM | | DIAMETER | 0.495 INCHES MINIMUM AND | | 0.497 INCHES MAXIMUM | | EFFECTIVE LENGTH | 1.312 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.472 INCHES MINIMUM AND | | 0.476 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.039 INCHES MINIMUM AND | | 0.042 INCHES MAXIMUM | | SECOND UNDERCUT WIDTH | 0.109 INCHES MINIMUM AND | | 0.141 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.016 INCHES MINIMUM AND | | 0.047 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | FIRST END LOCATION | BOTH ENDS | | HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER | | FIRST HOLE DIAMETER | 0.109 INCHES MINIMUM AND | | 0.141 INCHES MAXIMUM | | SPECIAL FEATURES | 0.125 IN. W BY 0.062 IN. DEEP GROOVE AROUND CENTER ON OD,0.250-24 UNS TAPPED HOLE IN ON END |
|
|