|
|
|
National Stock Number:
5315-00-752-5474
Federal Supply Class:
5315
National Item Identification Number:
007525474
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 5315007525474 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 7525474 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| UNDER HEAD LENGTH | 1.328 INCHES MINIMUM AND | | 1.359 INCHES MAXIMUM | | DIAMETER | 0.181 INCHES MINIMUM AND | | 0.186 INCHES MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OR | | ZINC OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 1 FED SPEC 1ST TREATMENT RESPONSE OVERALL | | CHAMFER LENGTH | 0.031 INCHES MINIMUM AND | | 0.062 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 12.0 DEGREES MINIMUM AND | | 18.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.297 INCHES MINIMUM AND | | 0.328 INCHES MAXIMUM | | HEIGHT | 0.047 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.068 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.109 INCHES MINIMUM AND | | 0.141 INCHES MAXIMUM |
|