5315-00-753-8386, PIN,STRAIGHT,HEADLESS

5360-00-753-8387 SPRING,HELICAL,COMPRESSION

National Stock Number:
5315-00-753-8386

Federal Supply Class:
5315

National Item Identification Number:
007538386

Description:
PIN,STRAIGHT,HEADLESS

Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.

Manufacturer Information:

104A901896	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH
3154854-00	90536	LOCKHEED MARTIN CORP
D19-750	00141	ROLLER BEARING CO OF AMERICA, INC
5315PL0802041	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
5315007538386	A00AM	E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
5315007538386	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
MS1655-641	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS16555-641	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS16555-641	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS1655-641	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

FIRST END TAPER ANGLE	4.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM
FIRST END TAPER LENGTH	0.141 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
FIRST END STYLE	CHAMFERED
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIAL	STEEL COMP 410 OR STEEL COMP 416 OVERALL
PIN OVERALL DIAMETER	0.1876 INCHES MINIMUM AND 0.1878 INCHES MAXIMUM
PIN OVERALL LENGTH	0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
PROPRIETARY CHARACTERISTICS	NPAC
SECOND END CORNER RADIUS	0.015 INCHES MINIMUM AND 0.046 INCHES MAXIMUM
SECOND END STYLE	RADIUS
SECOND END RELATIONSHIP WITH FIRST END	NOT IDENTICAL
SPECIFICATION/STANDARD DATA	80205-MS16555-641 NATIONAL STD/SPEC
SPECIAL FEATURES	RADIUS END MAY CHAMFERED 25 DEG
SURFACE FINISH	16.0 MICROINCHES OUTSIDE DIAMETER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL

Click here to Register for Free 30-day Trial