|
|
|
National Stock Number:
5315-00-754-0960
Federal Supply Class:
5315
National Item Identification Number:
007540960
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 69725-6D46 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| UNDER HEAD LENGTH | 1.531 INCHES NOMINAL | | DIAMETER | 0.1869 INCHES MINIMUM AND | | 0.1874 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 440C OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | CHAMFER LENGTH | 0.037 INCHES MINIMUM AND | | 0.057 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 13.0 DEGREES MINIMUM AND | | 17.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.302 INCHES MINIMUM AND | | 0.322 INCHES MAXIMUM | | HEIGHT | 0.037 INCHES MINIMUM AND | | 0.057 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND | | 0.070 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.090 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES GRIP | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73030 | | DESIGN CONTROL REFERENCE | 69725-6D46 |
|
|