| SURFACE TREATMENT | PHOSPHATE MANGANESE OR |
| PHOSPHATE ZINC OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232 TY M CL 1 MIL SPEC 1ST TREATMENT RESPONSE OR |
| MIL-P-16232 TY Z CL 1 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND |
| 35.0 ROCKWELL C MAXIMUM OVERALL |
| CHAMFER LENGTH | 0.046 INCHES MINIMUM AND |
| 0.078 INCHES MAXIMUM |
| PIN HEAD DIAMETER | 0.359 INCHES MINIMUM AND |
| 0.391 INCHES MAXIMUM |
| HEIGHT | 0.046 INCHES MINIMUM AND |
| 0.078 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.060 INCHES MINIMUM AND |
| 0.092 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.105 INCHES MINIMUM AND |
| 0.177 INCHES MAXIMUM |
| SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
| CRITICALITY CODE JUSTIFICATION | ABMZ |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 19200 |
| DESIGN CONTROL REFERENCE | 135B6163-2 |
| UNDER HEAD LENGTH | 1.171 INCHES MINIMUM AND |
| 1.223 INCHES MAXIMUM |
| DIAMETER | 0.2503 INCHES MINIMUM AND |
| 0.2505 INCHES MAXIMUM |
| HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| STYLE DESIGNATOR | STRAIGHT |
| MATERIAL | STEEL COMP 4340 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |