|
|
|
National Stock Number:
5315-00-764-6339
Federal Supply Class:
5315
National Item Identification Number:
007646339
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 104218-1 | 83014 | HARTWELL CORPORATION |
|
Techincal Specification:
| UNDER HEAD LENGTH | 0.348 INCHES MINIMUM AND | | 0.353 INCHES MAXIMUM | | DIAMETER | 0.124 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | IL-S-7720 MIL SPEC 10TH MATERIAL RESPONSE OVERALL | | CHAMFER LENGTH | 0.010 INCHES MINIMUM AND | | 0.030 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.188 INCHES NOMINAL | | HEIGHT | 0.026 INCHES MINIMUM AND | | 0.031 INCHES MAXIMUM | | HEAD COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.0350 INCHES MINIMUM AND | | 0.0356 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.070 INCHES MINIMUM AND | | 0.090 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 83014 | | DESIGN CONTROL REFERENCE | 104218-1 |
|
|