|
|
|
National Stock Number:
5315-00-785-5344
Federal Supply Class:
5315
National Item Identification Number:
007855344
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 6784887P002 | 17328 | UNITED PRECISION PRODUCTS CO., INC. | | 6784887P002 | 24617 | GENERAL MOTORS CORP | | 6784887P002 | 73342 | ALLISON TRANSMISSION INC | | 6784887P002 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| MATERIAL | STEEL COMP 416F OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5610 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | UNDERCUT | | SHANK LENGTH | 0.390 INCHES MINIMUM AND | | 0.420 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.344 INCHES NOMINAL | | SHANK DIAMETER | 0.2495 INCHES MINIMUM AND | | 0.2505 INCHES MAXIMUM | | OVERALL LENGTH | 0.925 INCHES MINIMUM AND | | 0.955 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.230 INCHES NOMINAL | | UNDERCUT WIDTH | 0.020 INCHES NOMINAL | | SECOND UNDERCUT WIDTH | 0.020 INCHES NOMINAL | | SECOND UNDERCUT DIAMETER | 0.230 INCHES NOMINAL | | SECOND SHANK DIAMETER | 0.2530 INCHES MINIMUM AND | | 0.2535 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.445 INCHES MINIMUM AND | | 0.475 INCHES MAXIMUM | | FIRST END STYLE | RADIUS | | FIRST END CORNER RADIUS | 0.1247 INCHES MINIMUM AND | | 0.1252 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | RADIUS | | SECOND END CORNER RADIUS | 0.1265 INCHES MINIMUM AND | | 0.1272 INCHES MAXIMUM | | FIRST END LOCATION | BOTH ENDS | | SURFACE FINISH | 63.000 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73342 | | DESIGN CONTROL REFERENCE | 6784887P002 |
|
|