| UNDER HEAD LENGTH | 0.647 INCHES MINIMUM AND |
| 0.667 INCHES MAXIMUM |
| DIAMETER | 0.122 INCHES MINIMUM AND |
| 0.124 INCHES MAXIMUM |
| HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| STYLE DESIGNATOR | STRAIGHT |
| MATERIAL | STEEL COMP 4037 OR |
| STEEL COMP 4130 OR |
| STEEL COMP 8630 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR |
| MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR |
| MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND |
| CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| HARDNESS RATING | 26.5 ROCKWELL C MINIMUM AND |
| 32.0 ROCKWELL C MAXIMUM OVERALL |
| SHEAR STRENGTH | 1840 DOUBLE POUND |
| CHAMFER LENGTH | 0.046 INCHES NOMINAL |
| PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL |
| PIN HEAD DIAMETER | 0.250 INCHES NOMINAL |
| HEIGHT | 0.046 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.060 INCHES MINIMUM AND |
| 0.080 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.091 INCHES NOMINAL |