|
|
|
National Stock Number:
5315-00-815-1385
Federal Supply Class:
5315
National Item Identification Number:
008151385
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 375624 | 70210 | HONEYWELL INTERNATIONAL INC. | | 375624 | 72599 | ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO | | 375624 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| UNDER HEAD LENGTH | 0.710 INCHES NOMINAL | | DIAMETER | 0.1248 INCHES MINIMUM AND | | 0.1251 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 440C OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | HARDNESS RATING | 58.0 ROCKWELL C NOMINAL OVERALL | | CHAMFER LENGTH | 0.030 INCHES MINIMUM AND | | 0.050 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 28.0 DEGREES MINIMUM AND | | 32.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.240 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | HEIGHT | 0.030 INCHES MINIMUM AND | | 0.050 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.005 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.135 INCHES MINIMUM AND | | 0.155 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES LONG SHANK | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 99193 | | DESIGN CONTROL REFERENCE | 375624 |
|
|